Can You Put a Portable Basketball Hoop In The Ground?

You have a brand new portable basketball hoop and now want to fix it into the ground. So that you may save your dunks and apt your ring from falling. 

But is it possible to put a portable basketball hoop on the base? Of course, it is!

Then how can you put your portable basketball hoop on the ground?

Well, in my personal opinion I’d say don’t let the stress jump over your head with this kind of weird topic. I am sharing my personal steps to put a portable basketball hoop into the ground for your assistance. 

So friends, pack your luggage to get into the boat of my 7 practical steps.

Ways To Put a Hoop In The Ground?

To convert a portable basketball hoop to an in-ground one, you need to first dig a hole with a hole digger about 30 inches deep and 21 inches wide. 

Moreover, don’t forget to create the hole as level as attainable since your basketball ring will be set on it.

Free Tip Alert: If you miss a post-hole digger, no problem! You can use a regular shovel. Just make sure to dig the hole big enough for the sleeve.

Next, you have to use a level to confirm that the sleeve is awash with the surface. If it’s not, operate some mud or sand to seal any open hole until the sleeve is the deck.

Later, it’s time to put the concrete mix into the hole. You want to add enough so that it covers the entire sleeve.

Use a scoop to buff out the concrete and ensure no air bubbles.

Lastly, You will need to wait for the concrete to dry before moving on to the next step.

7 Different Ways to Convert Portable Basketball Hoop to Inground

There are various ways by which you can install your portable basketball hoop on the ground. 

But here, I will discuss my seven ( hands-on) tactics that you can use to install your portable basketball hoop on the ground.

1. Choose Your Location Before You Dig

First of all, I intensely think about the location of my in-ground basketball hoop.

You also should be careful while selecting the location, because the right spot will make your game enjoyable for many years to come.

So, friends, you need to consider the following:

• How level is the surface? If it’s not level, you’ll never have proper shooting form.

• Can the concrete or asphalt be resurfaced? If not, you should put your hoop elsewhere.

• Is there enough room for a proper backboard and base? You don’t want it too close to any format like your home or garage.

• How much sunlight does the location get? You don’t wish to continual shade as this will make playing difficult.

• Can the location handle a little water? If it floods easily, you have to choose another spot.

Now you have all details about where to place your in-ground basketball hoop let’s look at how to install it correctly.

2. Dig a Hole

After deciding the best location for my basketball hoop, I pay attention to digging a hole.

I recommend you to use a power drill, a post-hole digger or shovel, and elbow grease.

First of all, make a 30 inches deep and 21 inches wide hole in the ground with the help of a post-hole digger or shovel.

Pro Tip: It’s essential to create the hole as level as attainable since your basketball ring will be set on it.

Next, you have to use a level to confirm that the sleeve is awash with the surface.

If it’s not, operate some mud or sand to seal any open hole until the sleeve is the deck.

Now, it’s time to add the concrete mix to the hole.

You need to make sure that you add enough sand so that the base is completely covered and some sand grains are left over.

Use a shovel to smooth it out, and then let it dry for 24 hours before moving on to the next step.

3. Add the Base

After the concrete has dried, you have to add the base. Though the entire basketball hoop is up the base, so it’s essential to get this part right.

Related: Where Is The Baseline In Basketball?

First, you need to put the floor on top of the sleeve. Then, utilize a level to ensure that it sits evenly on all sides.

In case, it’s not, you can operate with a shovel or your hands to adjust it until it is level.

Once the base is level, you need to fill it with sand. Further, you have to add enough sand to cover the entire bottom, about four inches deep.

Don’t forget to use a tamper or your hands to compact the sand to be friendly and tight.

This will help keep the base in place and control it from rolling around.

4. Add the Pole

Now, let’s move to the next step of adding the pole.

First of all, I ensure the pole is clean and able to adjust fast. After, I use a level as a guide. And then, set the pole in the middle of the hole that is already dug.

Pro Tip: If the pole isn’t 100% vertical, you can go with a hammer and chisel to fix it.

Related: 10 Easy Steps To Remove Basketball Pole

Once the pole is in the ground, you can habilitate your movable basketball ring into an in-ground one!

This will provide more stability for your hoop and make playing basketball more enjoyable.

5. Add the Backboard

Now, it’s time to add the backboard. First of all, you need to attach the backboard to the pole.

Later,  you have to use screws and washers to firmly connect the backboard to the pole.

Thirdly, make sure that the backboard is level before tightening the screws.

6. Install the Rim and Net

Now, move to the next step of the rim and net installation.

Let’s start by attaching the backboard to the pole using the mounting brackets.

Make sure that the backboard is level before tightening the bolts. Next, attach the rim to the backboard using the provided hardware.

Related: Which Basketball Rim is Better – Double-Rim vs Single-Rim

Lastly, attach the net to the rim.

Finally, my chums, you have a working basketball hoop! Just remember to review all bolts occasionally to check-in if they are secure and tight.

7. Finishing Touches

Lastly, you have to fill the hole with dirt or sand.

I recommend you make sure that the entire hole is covered and there are no gaps.

In this way, you can keep your Bball hoop adjusted in one place and resist it from rolling around.

Once you’re finished, you can start enjoying your new in-ground basketball hoop!

Where Do You Store Portable Basketball Hoops?

Portable basketball hoops can be stored in a garage, shed, or any other storage space that’s big enough to fit the ring.

If you’re not using the hoop, it’s good to take it down and store it in a safe place to prevent damage.

How Deep Does a Basketball Pole Need to be in The Ground?

The pole needs to be at least 30 inches in-depth of the ground to be long-lasting.

How Do I Save My Basketball Hoop From Slipping Over?

To keep your basketball hoop from falling over, you need to ensure that it is properly installed and that all of the bolts are tight.

You should also check in the bolts if they are still tight.

How Often Should I Check My Basketball Hoop?

It is always recommended to check your hoop regularly, maybe every week or two. Check all bolts if they are tight and secure.

Also, look for any damage that might have occurred during the game. If you see any damage, repair it immediately to prevent further damage.

What Brand of Bracket do I Require For My Basketball Hoop?

Well! If you are a Spalding user or Lifetime has been standing in your court, it is easier to find a right-fit bracket.

However, if you have any other brand, it is better to go with the same diameter pole or the second option.

Moreover, you can choose the mountain stand from various brands that fit your pole and backboard perfectly.

In-ground Basketball Hoop Vs. Portable Basketball Hoop

I experienced that in-ground basketball hoops are more stable than portable ones.

Following the manufacturer’s instructions, I installed a portable basketball hoop myself. It was not difficult; however, it took some time and effort.

After installing the in-ground hoop, I felt that it was very sturdy and would not move even if I dunked the ball.

On the other hand, portable hoops are less stable since they are not installed.

Surprisingly, many people who buy portable hoops return them because they are not satisfied with the hoop’s instability.

If you are looking for a basketball hoop that will give you the best game experience, I recommend an in-ground hoop over a portable one.

Let’s Wrap The Things Up

In short, you can put your portable basketball in-ground if you want a sturdier hoop that won’t move around as much.

Just make sure to follow the manufacturer’s instructions and check your hoop regularly for any damage.

Now, it’s your turn. Did you find the article helpful? Or want to share your experience with it?

You can participate by writing your precious words down in the article.